What Is a Temporary Power Pole?
A temporary power pole is a freestanding pole with a meter socket, breaker panel and grounding rod, built so the utility company can run service to a job site before permanent power exists. It is not something Melbourne Porta Pros installs directly. We coordinate delivery timing with your licensed electrician, who wires it, and the utility, who energizes it. Every construction site needs sanitation running the same week power goes live, and OSHA 1926.51(c)(1) sets toilet counts by crew size, starting at one facility for 20 workers or fewer. Most crews pair the pole order with a standard porta potty rental or a full construction site services package so nothing sits waiting on inspection day. GFCI protection under OSHA 1926.404(b)(1)(ii) applies once temporary power is live on site, so your electrician will want that documented before crews plug in tools.
How Much Does Temporary Power Pole Installation Cost in Melbourne?
Pole rental itself runs alongside delivery and service charges, not as a flat number, because wiring and utility coordination vary by site. What we can quote directly are the site services that go with it:
| item | duration | typical range |
|---|---|---|
| delivery fee | day | $100 to $150 |
| delivery fee | week | $50 to $150 |
| service fee | month | $100 to $300 |
| dumpster | week | $426 to $778 |
Get a firm number through request a quote once your electrician has confirmed the amp load and panel type. Bundling the pole order with a roll-off dumpster rental or temporary fence rental around the same delivery window often saves a separate trip charge.
Where Should a Temporary Power Pole Go on a Construction Site?
Placement depends on the utility's access requirements and your site layout, so check with the utility company and your electrician before the pole is set. General site rules still apply: OSHA 1926.56(a) covers minimum lighting for work areas near the pole, and OSHA 1926.25 requires debris cleared from the path to it. If the pole sits near a public sidewalk or right of way, placement there needs confirming with the City of Melbourne. Sites often run a temporary power pole next to a mobile office trailer rental or storage container rental, keeping power, tools and paperwork close together. Crews working 5.7 miles south in West Melbourne or 6.9 miles northeast in Indian Harbour Beach follow the same layout logic: pole near the panel box, sanitation near the crew, fencing around the perimeter with a chain link temporary fence.
How long does a temporary power pole stay on site?
It stays up until permanent service is connected, which can be weeks or months depending on inspection scheduling. Many Melbourne builds keep it through the whole framing and rough-in phase, alongside a portable toilet rental and a 10 yard dumpster rental for daily debris.
Do I need a permit for a temporary power pole?
Permit requirements are set by the city and the utility, not by Melbourne Porta Pros, so confirm directly with the City of Melbourne before delivery. See our dumpster permit requirements page for how that process works on a related item.
What amp size do I need for a construction trailer?
A 200 amp service covers most single-trailer construction setups, but your electrician sizes it against your actual tool and equipment load. Check with them before ordering the pole itself.
Can Melbourne Porta Pros wire the power pole?
No. We coordinate delivery and scheduling around your electrician and the utility, but wiring and energizing the pole is licensed electrical work, not something our crews perform.
What else do I need for a new construction site?
Most Melbourne sites need sanitation, waste and fencing running before power goes live. Start with how many porta potties do I need and OSHA portable toilet requirements to plan the rest of the site.
Next step
Get a delivery date
Tell us the address, the dates and the headcount. We size the order and confirm the route.